Pharmaceutical Dust Collector for Tablet Press, Tablet Coating
- Model
- Acmancoat
Item specifics
- Application
- Pharmaceutical Dust Extraction
- Filter Material
- Polyester Cartridge Filters
- Cleaning Mode
- Pulse jet compressed air backflow
- Compressed Air Source
- 0.4-0.6MP
- Jet Control
- Timer/pulse controller
- Power Supply
- 380V/50HZ or Customize
Review
Description
Dust Extractor for Pharmaceutical Tablet Coating / Tablet Pressing
ACMAN had serve lots of pharmaceutical factory, and tablet film coating machine exhaust gas treatment is their tough problem, because some coating material is sticky, some just lime stone powder, some are enteric solubility, some are gastric solubility.
However, ACMAN has our own solution to solve the problem: 1; washable cartridge dust collector; 2:water scrubber+sinter-plate filter equipment.
However, ACMAN has our own solution to solve the problem: 1; washable cartridge dust collector; 2:water scrubber+sinter-plate filter equipment.
Highly recommend-cartridge dust collector solution
This dust collector is unique design for Perforated coating pan for tablets, the material use cleanroom standard stainless steel, the filters is washable type. if the spray solvent is organic matter, the anti-explosive device should be considered into the design.
Why there are two air inlets on the equipment?
because the tablet coating equipment must wash after one batch finished, when in the washing mode, the moisture will came out, the the dust on the filters will became sticky, so we should use other access when on the washing mode.
Wet scrubber+sinter-plate dust collector solution
Customer usage
Contact Email: Info@dustscrubber.com
