Laser Engraver Fume Extractor, Industrial Fume Extraction System
Laser Engraver Fume Extractor, Industrial Fume Extraction System
Model
TR-20B

Item specifics

Application
Industrial Dust/fume Extraction
Filter Material
Polyester Cartridge Filters
Cleaning Mode
Pulse jet compressed air backflow
Compressed Air Source
0.4-0.6MP
Jet Control
Timer/pulse controller
Power Supply
380V/50HZ or Customize

Review

Description

Laser Engraver Fume Extractor, Industrial Fume Extraction System
How Does Fume Extractor Working?
While the laser machine engraving the sheet metal, wood or acrylics, the fume need to catch from the machine. Most of the laser engraver machine have air extraction hole.

The fume will be extracted into the ACMAN fume extractor air inlet by the centrifugal fan. There are lots of cartridge filters inside of our fume extraction machine, because of its large filtration area, the filtration velocity is low, so the efficiency is very high. In this process, the fume dust will be filtered by these filters.

Different from the other filter units, ACMAN’s filters are not medium efficiency filter boards, we have pulse jet system to clean the cartridge filters  online. so the filters could be renewed.

Then the clean air come out from the dust collector machine.
Advantage
1: Compact design(fan+jet system+filters+dust bin) saving lots of space for factories;
2: Larger filter areas than bag filter dust collector, because of its pleated cartridge filters;
3: Filters could renewable, the pulse-jet system keep the filters cleaning in a regular time;
4: Various of filter types, suitable for different working conditions;
5: Easy for maintenance: the filters are easy to change and only should remove dust regularly;
6: Less power consumptions: the centrifugal fan's design could provide high pressure and big airflow, the motor is E2 efficiency.                                  
7: Air consumption is low: the compressed air consumption for pulse-jet is lower than baghouse;
8: Wide applications: it can catch fine dust in most of industrials, and removes dust from pulverizing and grinding, crushing, sanding, powder injection and sealing, severing and cutting, stone and metal work, cutting work, substrate work and welding work... but moisture/sticky dust;
9: The efficiency is about F9 grade, if have HEPA secondary filtration, the efficiency is about H13;
10: Lower Noise, with sound proof sponge and centrifugal fan isolation box;
11: Material: 2mm SS400 carbon steel with powder coating or  stainless steel SUS304.
Parameter

Model

Air volume

m³/h

Filter Area

(m2)

Fan pressure

Pa

Power

kw

Air Source

(Mp)

Sound

dB

TR-10B
900-1100
12
2040-1780
1.1
0.4-0.6
67
TR-15B
1400-1600
18
2040-1780
1.5
0.4-0.6
70
TR-25B
1688-2476
30
2150-1820
3
0.4-0.6
73
TR-30B
2664-3405
30
2700-2200
4
0.4-0.6
73
Contact Us
Wechat
+86 19550289881
Info@dustscrubber.com
+86 18768123711