Rigid Sinter-Plated Filters/Filtermedia, Polyethylene Sinter Board, DELTA Flex PE Filter Unit
Rigid Sinter-Plated Filters/Filtermedia, Polyethylene Sinter Board, DELTA Flex PE Filter Unit
Rigid Sinter-Plated Filters/Filtermedia, Polyethylene Sinter Board, DELTA Flex PE Filter Unit
Rigid Sinter-Plated Filters/Filtermedia, Polyethylene Sinter Board, DELTA Flex PE Filter Unit
Model
DELTA-sinter plate filter for dust collector

Product review

Description

PE Sinter-Plate Filters for Dust Collector
Advantage of sintering filters
 Filter element lifetime of up to 15 years possible
 Low maintenance costs due to long useful life of the filter elements
 Constant pressure drop guarantees consistent air flow
 High separation efficiency due to surface filtration 
 Clean gas emissions <1.0 mg/m3
 Compact rigid body generates a robust filter design
 Filter medium: capable to be washed, recycled and refurbished
 Universal mounting from the raw- or clean gas side of the filter unit
 Horizontal or vertical installation possible
 Filter medium absolutely free of fibers, ideal for product recovery
 Excellent use for highly abrasive dusts
 Antistatic version of the filter elements available
 FDA-conformity by using food-grade filter material
Basic Material of Sintered Filter
PE Base material
The body of the filter element is formed by a sintered polyethylene PE-matrix

PTFE Coating:sintered plate filter's PTFE Coating
The filter surface is built by a micro-porous and hydrophobic PTFE-coating, which is firmly embedded into the pores of the PE-matrix. 
1:dust:< 8 µm



2: PTFE Coating: 
2-3 µm (5 µm thick)





3:PE base material:30 µm(4 mm thick)
Filter bags  VS  Cartridge filters VS Sinter-plate filters
Filter bags
Advantage:
1:low price
2:sustain high temperature:280census degree

Disadvantage:
1:low efficiency;
2:high consumption of compressed air;
3:short lifespan
4:maintenance: hard to change the filters;
5:big size of the equipments.

Cartridge filters
Advantage:
1:high efficiency;
2:low price;
3:large filter area;
4:easy to install

Disadvantage:
1:not suitable for high abrasive dust;
2:hard to clean the folded material;
3:not suitable for high concentration dust;
4:less lifespan
sinter plate filter







Advantage:
1:high efficiency;
2:lower emission;
3:long life time;
4:large filter area;
5:easy to mounting and change;
6:Acid and alkali resistant

Disadvantage:
1:temperature less than 80census degree.
sinter plated dust extractor use unique filters, not filter bags, cartridges, but UHMWPE sintering rigid filter with PTFE coating.
1. Can capture dust of 0.1μm particle size, extremely high industrial dust removal efficiency (H12);
2. The emission concentration is much less than 1mg/Nm3; the heating season dust collector switches to indoor discharge, which can save a lot of energy!
3. The coating is deeply embedded in the substrate, will not wear and tear, and maintain excellent filtration performance from beginning to end;
4.PE substrate + PTFE coating, pure surface filtration, stable resistance throughout the service life;
5. Rigid filter material, extremely wear-resistant, can achieve long life and reduce the consumption of compressed air; (life expectancy > 10 years)
6. PE and PTFE bring excellent chemical resistance;
7. Self-lubricating material, easy to clean ash;
8. Can be cleaned;    9. Absolutely free of silicon;
10. No fiber shedding, no risk of product contamination;
11. Compact shape, only 1/2~1/3 of the baghouse size, but still adapt to high inlet concentration;
12. Anti-static model optional(surface resistance ≤ 10E6, suitable for explosive dust);
Videos