Dust Collector Unit VS Central Dust Collection:Which One Is Better For You Project

A lot of dust can be produced by metal polishing and wood furniture common in industrial processing and wood furniture polishing. The quality of metal elements is heavier and the quality of wood dust is lighter. In practical applications, factors such as the nature of the dust, the design of the exhaust pipe network, fire prevention, explosion protection, power consumption, energy consumption, pressure loss assessment, operation and maintenance costs, etc. To determine the selection of equipment. However, in many dust treatment projects, there is a one-size-fits-all phenomenon, and the central dust removal treatment plan is always adopted.

Central dust collection saves space, simplifies management, and facilitates investment. For the lighter dust quality and simpler pipe network, it is more convenient to apply central dust removal.

But central dust removal also has more disadvantages

If the dust quality is heavier, the pipe network will be longer: the effect of early extraction and exhaust is better. With the application time, the effect of extraction and exhaust becomes worse and worse, the resistance becomes larger, and the energy consumption of the fan increases.

The main reason is that the heavier dust naturally settles during the operation of the pipe network. With the accumulation of dust settlement, the ventilation cross-section becomes smaller, the resistance increases, the amount of air extraction becomes smaller, and the energy consumption increases.

If the dust quality is light, but the pipe network is complex and the accumulated pipe network is long, the above problems will also occur.

Because the exhaust air pipes are all closed pipes, if dust accumulation and sedimentation occur in the pipes and block the air pipes, the cleaning is more troublesome, and it needs to be cleaned frequently, which increases management costs and is not conducive to the recovery of dust.

Advantage:The cost of dust extraction unit is low, the dust removal effect is good, the energy consumption is low, the pressure loss is small, and the dust recovery is convenient. It is very effective for metal polishing and polishing applications, and the recovery rate of precious metals is high.

Disadvantages of single station dust remover: more space occupation, more troublesome management, and higher one-time investment cost.

The dust collection filter unit belongs to the pre-filter device, and the exhaust pipe network runs through filtered and purified air. The management and maintenance cost of the exhaust pipe network is greatly reduced, the service life of the pipeline is extended, the loss of power consumption and energy consumption is reduced, and the operating cost is reduced.

Contact ACMAN

Email: Eric@dustscrubber.com
Web: www.dustscrubber.com